A project to develop an LNG fuelled Kamsarmax bulker to meet the 2020 targets can have even more benefits the project partners say.
Under the Project Forward initiative led by Athens-Based Arista Shipping, with Wärtsilä as one of the participants, it has been demonstrated that with LNG as fuel, an advanced hull design, and highly efficient propulsion machinery, it will be possible to meet the IMO’s target for a 40% reduction in carbon intensity by 2030.
Model tests of the Project’s concept vessel indicate that the Energy Efficiency Design Index (EEDI) is well below the currently most stringent Phase III level. The EEDI reflects the CO2 emissions per transport work and is a measure of carbon intensity. EEDI Phase III is applicable to ships built after 2025 and signifies a 30% reduction from the 2008 reference level.
The IMO has also announced that efforts should be made for a possible further reduction in CO2 emissions per transport work of up to 70 percent by 2050. One commonly discussed way to reduce such emissions has been to limit the propulsion engine power, but this would require a significantly lower service speed, resulting in a serious impact on the chain of logistics.
Project Forward shows that this 70 percent reduction in CO2 emissions target can be met, even without lowering service speeds, through the use of carbon neutral fuels mixed with LNG. Such carbon neutral fuels can be transported, stored, and consumed in a similar way to that of fossil LNG.
“Through the advanced engine technology available today, LNG has a clearly superior well-to-wake emissions profile compared to liquid fuel. LNG appears not as a transition fuel, but the fuel of tomorrow and for many years to come,” said Antonis Trakakis, Technical Director at Arista.
The concept vessel’s hull form has been optimised in cooperation with Finnish ship designer Deltamarin and classification society American Bureau of Shipping (ABS). “Deltamarin has a long history in energy-efficient ship designs where hull form development has always been one of the spearheads,” said Tommi Hietamäki, Project Engineer at Deltamarin.
“The efficient propulsion design concept for Project Forward is based on a novel arrangement featuring just two highly efficient Wärtsilä 31DF engines without auxiliary gensets. The project is totally in line with Wärtsilä’s Smart Marine vision that foresees an era of concept solutions delivering optimal efficiency, safety, and environmental sustainability,” said Johnny Kackur, General Manager, Wärtsilä Marine Solutions.
In addition to Arista Shipping, Deltamarin, ABS and Wärtsilä, the French LNG membrane containment system designer GTT is also involved in the project. The vessel is fitted with an LNG tank positioned midships.